This silicone is guaranteed to stop black mould due to it's structure containing mould shield.
Mould Resistant Water Tight
Direct Bond Adhesive With Legendary Grabbing Performance
The Solvent Free Formula Will Not React With Plastic And Is Ideal To Use With All Our Panels
Use For Installing Panels Where One Surface Is Porous (Plasterboard, Plastered Walls, Brick, Block, Timber etc)
We Recommend Using Half A Tube Per Panel On Installation
This bottle contains 380ml of adhesive
Method Of Application
- Cut the Pink Grip nozzle at an angle of 45 degrees to create a clean cut then pierce membrane
- Apply onto surface using an industry standard sealant gun
- Apply a 5mm bead of adhesive in a zig zag method along the length of the panel to be fixed
- Press into place and apply an even pressure onto the entire surface
- Leave to dry and cure for 24-48hours
Note | If gap filling is required - for example panels against an uneven wall, mark the areas where there is a larger gap and apply a thicker bead in these affected areas.